Yamato Scientific HC200 Cool Block - Manual (Page 31)

29
Indication after Step/Step Procedure Explanation
4.
(When the registered temperatures are less than 9)
•
Skip this step.
(When the registered temperatures are already 10.)
Push either the ▼ key or the ▲ key.
•
Push either the ▼ key or the ▲ key to flash a
temperature that can be overwritten on the main
display.
Ex: In the example on the left, 50 o C was selected as a
temperature to be overwritten.
5.
(When the registered temperatures are less than 9)
•
Skip this step.
(When the registered temperatures are already 10.)
Push the ENTER key.
•
Push the ENTER key.
⇒ ⇒ ⇒ ⇒ The controller turns to the present temperature
registration mode. The main display flashes
.
⇒ ⇒ ⇒ ⇒ The sub display shows .
6. Push either the ▼ key or the ▲ key.
Ex. registering 56 o C
•
Push either the ▼ key or the ▲ key to flash a
temperature to be registered on the main display.
In the example on the left, 56
o C is registered.
7. Push the ENTER key.
•
Push the ENTER key.
⇒ ⇒ ⇒ ⇒ The displays return to the screen shown just before
you have pushed the MODE key, that is before Step
(1).
All these steps are for the registration of preset All these steps are for the registration of preset All these steps are for the registration of preset All these steps are for the registration of preset
temperatures. temperatures. temperatures. temperatures.
Ex: a temperature
can be overwritten