Yamato Scientific HC200 Cool Block - Manual (Page 18)

16
Indication after Step/Step Procedure Explanation
4. Push the ENTER key.
⇒ ⇒ ⇒ ⇒ Pushing the ENTER key changes the operation
mode from the fixed temperature operation to the
auto-stop operation.
⇒ ⇒ ⇒ ⇒ The main display shows the latest measured
temperature.
⇒ ⇒ ⇒ ⇒ The sub display shows either the remaining time
before operation stop or the preset temperature.
Ex: In the example on the left -- the sub display shows
the remaining time.
! When you want to check the preset temperature,
switch the sub display information. (See “Changing
Sub Display Screens” on page. 22)
⇒ ⇒ ⇒ ⇒ The PROGRAM lamp turns from flashing to steady
lit.
5. When the auto-stop operation finishes
⇒ ⇒ ⇒ ⇒ When the set time is up, HC200 stops regulating
temperature.
⇒ ⇒ ⇒ ⇒ The sub display flashes word
(Display shows the
remaining time)
(Display shows the
preset temperature)
Swich the
sub display
infomation