Yamato Scientific HC200 Cool Block - Manual (Page 34)

32
Setting and releasing the resume function
Indication after Step/Step Procedure Explanation
1. Select “Resume” selection mode
Select the corresponding function. See “ Menu
Functions ” on page 21.
•
Select “Resume” selection mode by pressing the
MODE key.
⇒ ⇒ ⇒ ⇒ The sub display shows the present state of the
resume function.
⇒ ⇒ ⇒ ⇒ When the resume function is in inactivity it shows
.
⇒ ⇒ ⇒ ⇒ When the resume function is in activity, it shows
.
2. Push the ENTER key
•
Push the ENTER key.
⇒ ⇒ ⇒ ⇒ T The controller turns to the resume function setting /
releasing mode.
⇒ ⇒ ⇒ ⇒ The sub display shows .
3. Push either the ▼ key or the ▲ key.
•
Set to when you activate the resume function
and set to when you inactivate the resume
function.
•
When pushed either the ▲ key or the ▼ key, the main
display flashes and alternately.
4. Push the ENTER key
(When set the resume function)
(When released the resume)
The display returns to the screen shown just before
you have pushed the MODE MODE MODE MODE key
•
Push the ENTER key.
⇒ ⇒ ⇒ ⇒ When set the resume function:
The main display shows the preceding preserved
temperature.
The sub display flashes
.
⇒ ⇒ ⇒ ⇒ When released the resume function:
The display returns to the screen shown just before
you have pushed the MODE key.
When you set the resume function:
5. Push either the ▼ key or the ▲ key.
•
Push either the ▼ key or the ▲ key until the flashing
value on the sub display reaches your desired
temperature.
In the example shown on the left, the preserved
temperature is set to 25
°
C.
6. Push the ENTER key
The display returns to the screen shown just before
you have pushed the MODE MODE MODE MODE key
•
Push the ENTER key.
⇒ ⇒ ⇒ ⇒ The display returns to the screen shown just before
you have pushed the MODE key.
Setting Releasing
Setting Releasing
Setting Releasing
Ex. : The preceding
preserved temperature
Ex. :The preserved
temperature you need