Yamato Scientific WR600S AutoPure User Manual
Operating and maintenance manual, Autopure, Yamato scientific co., ltd
This manual is related to the following products:
Table of contents
Document Outline
- INTRODUCTION
- INSTALLATION
- Unpacking
- Installation of the system
- Connection of feed water to the system (Figure 3)
- Connection of the reject tubing(s) (figure 3).
- Installation of the Q-Gard purification pack (Figure 4)
- Electrical connection of system
- Installation of the QUANTUM Polisher Cartridge (Figure 4)
- Rinsing the Autopure WR600 for the first time
- Cleaning the A-10 measurement cell.
- Connection of an RS 232 interface with the system.
- OPERATING THE AUTOPURE WR600 SYSTEM
- MAINTENANCE
- MAINTENANCE
- APPENDIX 1
- Interrupting the sanitisation cycle of an UF cartridge
- Purging entrapped air from the UF cartridge.
- Interrupting the A-10 cleaning cycle
- Replacing the main electrical power fuse
- Regulating the mobility of the point of use arm
- Recycling the reject water from the A-10 TOC
- System is not operated for a long time
- Warranty