Wasp Barcode WaspLabeler +2D User Manual - Manual (Page 91)

87
Wasp Labeler User Manual
ISBN Properties Box Options
The table below lists the options available for ISBN in the Properties box > Barcode tab.
ISBN
Field Description
Symbology
Select ISBN from the drop down list. For a complete list of available
symbologies along with examples and descriptions of each, please
refer to the topic
Barcode Symbology Reference .
% of Nominal
The nominal size for a EAN/JAN barcode is 1inch. The usual
reduced size is 80% of the nominal size.
Specify Bar
Height
Check this box to enter a specific bar height.
Bar Height Enter the exact bar height in the field provided.
ITF 14 Properties Box Options
The table below lists the options available for ITF 14 in the Properties box > Barcode tab.
ITF14
Field Description
Symbology
Select ITF 14 from the drop down list. For a complete list of available
symbologies along with examples and descriptions of each, please
refer to the topic
Barcode Symbology Reference .
Bar Height
This setting determines how tall your barcode will be. The bar height
does not affect density.
Bar Width
This setting determines density of the barcode. Increase the bar
width (applies to the individual bars in the barcode) and the density is
decreased. You might want a more dense barcode to fit on a small
label, for example. Keep in mind that a barcode that is too dense
may be harder for a scanner to read and may not be scannable at all.
Char per Inch
This settings stands for character per inch. You can add more
characters per inch by increasing the number in this field, resulting in
a more dense barcode. Notice that as you increase the number in
the Char per inch field, the Bar Width field decreases. The more
characters you add per inch, the more dense your barcode will be.
Keep in mind that a barcode that is too dense may be harder for a
scanner to read and may not be scannable at all.