Wasp Barcode WaspLabeler +2D User Manual - Manual (Page 188)

184
Wasp Labeler User Manual
3. Select the column from which you want to pull the number of copies from the Column drop
down menu (the column must be numeric).
4. Next, in the Substitute the value with field, enter the number of copies to print if rows of
the selected column are blank or contain non-numeric values.
5. The next section applies if the value is equal to zero. You can select to:
Print no copies for the record - this option means no labels will be printed if the value
equals zero.
Use the substitution value from above - this is the number you entered in the Substitute
the value with field.
6. Finally, you can limit the maximum number of copies to a specified amount. Labels will not
be printed over this amount even if the number in the associated column is greater. The
default is 999.
7. Click OK on the Dynamic from Column in Data Source when you are finished entering
information.