Wasp Barcode WaspLabeler +2D User Manual - Manual (Page 144)

140
Wasp Labeler User Manual
Enter 0 (zero) to return all rows of data. Keep in mind that a very large number of rows may
result in slower performance.
6. Click Test Connection to make sure Labeler is able to successfully establish a connection to
the selected file. If a connection is established, the message shown below appears:
Click OK on the Test Connection message to close it.
7. Click Apply to add the connected file to your Labeler project. The data contained in the
selected file will appear on the Data tab as shown in the example below:
8. You can now perform the following functions:
Refresh the Data
Edit the Connection
Remove Connection
Sort the Data
Filter the Data
Join two or more tables