Wasp Barcode WaspLabeler +2D User Manual - Manual (Page 87)

83
Wasp Labeler User Manual
Code 93 Properties Box Options
The table below lists the options available for Code 93 in the Properties box > Barcode tab.
Code 93
Field Description
Symbology
Select Code 93 from the drop down list. For a complete list of
available symbologies along with examples and descriptions of each,
please refer to the topic
Barcode Symbology Reference .
Bar Height
This setting determines how tall your barcode will be. The bar height
does not affect density.
Bar Width
This setting determines density of the barcode. Increase the bar
width (applies to the individual bars in the barcode) and the density is
decreased. You might want a more dense barcode to fit on a small
label, for example. Keep in mind that a barcode that is too dense
may be harder for a scanner to read and may not be scannable at all.
Char per Inch
This settings stands for character per inch. You can add more
characters per inch by increasing the number in this field, resulting in
a more dense barcode. Notice that as you increase the number in
the Char per inch field, the Bar Width field decreases. The more
characters you add per inch, the more dense your barcode will be.
Keep in mind that a barcode that is too dense may be harder for a
scanner to read and may not be scannable at all.