Wasp Barcode WLS9600 Product Reference Guide - Manual (Page 85)

ENTER/EXIT PROGRAMMING MODE Flash Off Time
Product Reference Guide 75
Flash Off Time
This feature specifies the OFF time for the indicator LED while in Flash Mode. The selectable
range is 100 to 9,900 milliseconds (0.1 to 9.9 seconds), in 100 millisecond increments. See
page 257 in “References” for detailed information on setting this feature.
Select Flash OFF Time Setting
Make a mistake? Scan the CANCEL barcode to abort and not
save the entry string. You can then start again at the begin-
ning.
CANCEL
DEFAULT 06 = Flash is OFF for 600ms
Green Spot Duration
Specifies the duration of the good read pointer beam after a good read.
Green Spot Duration = Disable (Green Spot is Off)
Green Spot Duration = Short (300 msec)
DEFAULT
Green Spot Duration = Medium (500 msec)
Green Spot Duration = Long (800 msec)