Industrial 2 of 5 set length 1, Default – Wasp Barcode WLS9600 Product Reference Guide User Manual
Page 166

Industrial 2 of 5
ENTER/EXIT PROGRAMMING MODE
156
WLS9600
Industrial 2 of 5 Set Length 1
This feature specifies one of the barcode lengths for
Industrial 2 of 5 Length Control
the minimum label length if in
Mode, or the first fixed length if in
Mode. Length includes the barcode’s data characters only. The length can be set from 0 to 50
characters.
provides some examples for setting Length 1. See
if you want detailed
instructions on setting this feature.
Table 12. Industrial 2 of 5 Length 1 Setting Examples
STEP
ACTION
EXAMPLES
1
Desired Setting
00 Characters
07 Characters
15 Characters
50 Characters
2
Scan ENTER/EXIT PROGRAMMING MODE
3
Scan SELECT INDUSTRIAL 2 OF 5 LENGTH 1 SETTING
4
Scan Two Characters From
‘0’ and ‘0’
‘0’ and ‘7’
‘1’ and ‘5’
‘5’ AND ‘0’
5
Scan ENTER/EXIT PROGRAMMING MODE
Select Industrial 2 of 5 Set Length 1 Setting
Make a mistake? Scan the CANCEL barcode to abort and not save the
entry string. You can then start again at the beginning.
CANCEL
DEFAULT
01 = Length 1 is 1 Character