Led and beeper indicators, Power on alert, Good read: when to indicate – Wasp Barcode WLS9600 Product Reference Guide User Manual
Page 78: Power on alert good read: when to indicate, Ower, Lert, Ndicate, Default
LED and Beeper Indicators
ENTER/EXIT PROGRAMMING MODE
68
WLS9600
LED AND BEEPER INDICATORS
Power On Alert
Disables or enables the indication (from the Beeper) that the reader is receiving power.
Power On Alert = Disable (No Audible Indication)
Power On Alert = Four Beeps
DEFAULT
Good Read: When to Indicate
This feature specifies when the reader will provide indication (beep and/or flash its green LED)
upon successfully reading a barcode. .
DEFAULT
Indicate Good Read = After Decode
Indicate Good Read = After Transmit
Indicate Good Read = After CTS Goes Inactive, Then Active
This option, which uses CTS, is only valid for RS-232 interfaces.