Plessey set length 1, Default – Wasp Barcode WLS9600 Product Reference Guide User Manual
Page 226

Plessey
ENTER/EXIT PROGRAMMING MODE
216
WLS9600
Plessey Set Length 1
This feature specifies one of the barcode lengths for
. Length 1 is the
Mode, or the first fixed length if in
Mode. Length includes the barcode’s data characters only. The length can be set from 01 to 50
characters.
provides some examples for setting Length 1. See
setting this feature.
Table 26. Plessey Length 1 Setting Examples
STEP
ACTION
EXAMPLES
1
Desired Setting
01 Characters
07 Characters
15 Characters
50 Characters
2
Scan ENTER/EXIT PROGRAMMING MODE
3
Scan SELECT Plessey LENGTH 1 SETTING
4
Scan Two Characters From
‘0’ and ‘1’
‘0’ and ‘7’
‘1’ and ‘5’
‘5’ AND ‘0’
5
Scan ENTER/EXIT PROGRAMMING MODE
Select Plessey Set Length 1 Setting
Make a mistake? Scan the CANCEL barcode to abort and not save the
entry string. You can then start again at the beginning.
CANCEL
DEFAULT
01 = Length 1 is 1 Character