Codabar set length 1, Default – Wasp Barcode WLS9600 Product Reference Guide User Manual
Page 184

Codabar
ENTER/EXIT PROGRAMMING MODE
174
WLS9600
Codabar Set Length 1
This feature specifies one of the barcode lengths for
. Length 1 is the
Mode, or the first fixed length if in
Mode. Length includes the barcode’s start, stop, check and data characters. The length must
include at least one data character. The length can be set from 3 to 50 characters.
provides some examples for setting Length 1. See
setting this feature.
Table 16. Codabar Length 1 Setting Examples
STEP
ACTION
EXAMPLES
1
Desired Setting (and pad with
leading zeroes)
03 Characters
09 Characters
15 Characters
50 Characters
2
Scan ENTER/EXIT PROGRAMMING MODE
3
Scan SELECT CODABAR LENGTH 1 SETTING
4
Scan Two Characters From
‘0’ and ‘3’
‘0’ and ‘9’
‘1’ and ‘5’
‘5’ AND ‘0’
5
Scan ENTER/EXIT PROGRAMMING MODE
Select Codabar Length 1 Setting
Make a mistake? Scan the CANCEL barcode to abort and not
save the entry string. You can then start again at the begin-
ning.
CANCEL
DEFAULT
03 = Length 1 is 3 Characters