China postal code set length 2, Default – Wasp Barcode WLS9600 Product Reference Guide User Manual
Page 175

ENTER/EXIT PROGRAMMING MODE
China Postal Code Set Length 2
Product Reference Guide
165
China Postal Code Set Length 2
This feature specifies one of the barcode lengths for
China Postal Code Length Control
. Length 2 is
the maximum label length if in
Mode, or the second fixed length if in
Mode. The length includes the barcode’s check and data characters.
The length can be set from 2 to 50 characters. A setting of 0 specifies to ignore this length (only
one fixed length).
provides examples for setting Length 2. See
setting this feature.
Table 15. China Postal Code Length 2 Setting Examples
STEP
ACTION
EXAMPLES
1
Desired Setting
Ignore This
Length
4 Characters
14 Characters
50 Characters
2
Pad with leading zeroes to
yield two digits
00
04
14
50
3
Scan ENTER/EXIT PROGRAMMING MODE
4
Scan SELECT China Postal Code LENGTH 2 SETTING
5
Scan Two Characters From
‘0’ and ‘0’
‘0’ and ‘4’
‘1’ and ‘4’
‘5’ AND ‘0’
6
Scan ENTER/EXIT PROGRAMMING MODE
Select China Postal Code Length 2 Setting
Make a mistake? Scan the CANCEL barcode to abort and not
save the entry string. You can then start again at the begin-
ning.
CANCEL
DEFAULT
50 = Length 2 is 50 Characters