Standard 2 of 5 set length 1, Default – Wasp Barcode WLS9600 Product Reference Guide User Manual
Page 161

ENTER/EXIT PROGRAMMING MODE
Standard 2 of 5 Set Length 1
Product Reference Guide
151
Standard 2 of 5 Set Length 1
This feature specifies one of the barcode lengths for
Standard 2 of 5 Length Control
the minimum label length if in
Mode, or the first fixed length if in
Mode. Length includes the barcode’s check and data characters. The length can be set from 1 to
50 characters.
provides some examples for setting Length 1. See
if you want detailed
instructions on setting this feature.
Table 10. Standard 2 of 5 Length 1 Setting Examples
STEP
ACTION
EXAMPLES
1
Desired Setting
01 Character
07 Characters
15 Characters
50 Characters
2
Scan ENTER/EXIT PROGRAMMING MODE
3
Scan SELECT STANDARD 2 OF 5 LENGTH 1 SETTING
4
Scan Two Characters From
‘0’ and ‘1’
‘0’ and ‘7’
‘1’ and ‘5’
‘5’ AND ‘0’
5
Scan ENTER/EXIT PROGRAMMING MODE
Select Standard 2 of 5 Length 1 Setting
Make a mistake? Scan the CANCEL barcode to abort and not
save the entry string. You can then start again at the begin-
ning.
CANCEL
DEFAULT
08 = Length 1 is 8 Characters