Codablock f set length 2, Default – Wasp Barcode WLS9600 Product Reference Guide User Manual
Page 148

Codablock F
ENTER/EXIT PROGRAMMING MODE
138
WLS9600
Codablock F Set Length 2
This feature specifies one of the barcode lengths for
maximum label length if in
Mode, or the second fixed length if in
Mode. Length includes the barcode’s check, data, and full-ASCII shift characters. The length
does not include start/stop characters.
provides examples for setting Length 2. See
for detailed instructions on setting
this feature.
Table 7. CODABLOCK F Length 2 Setting Examples
STEP
ACTION
EXAMPLES
1
Desired Setting
00 (Ignore This
Length)
07 Characters
15 Characters
50 Characters
2
Scan ENTER/EXIT PROGRAMMING MODE
3
Scan SELECT CODABLOCK F LENGTH 2 SETTING
4
Scan Three Characters From
‘0’, ‘0’ and ‘0’
‘0’, ‘0’ and ‘7’
‘0’,‘1’ and ‘5’
‘0’,‘5’ AND ‘0’
5
Scan ENTER/EXIT PROGRAMMING MODE
Select Codablock F Length 2 Setting
Make a mistake? Scan the CANCEL barcode to abort and not save the
entry string. You can then start again at the beginning.
CANCEL
DEFAULT
100 = Length 2 is 100 Characters