Code 4 hex to decimal conversion, Code 5, Code 5 enable/disable – Wasp Barcode WLS9600 Product Reference Guide User Manual
Page 232: Default

Code 5
ENTER/EXIT PROGRAMMING MODE
222
WLS9600
Code 4 Hex to Decimal Conversion
This feature enables/disables the conversion of hexidecimal label data to decimal label data.
Code 4 Hex to Decimal Conversion = Disable
Code 4 Hex to Decimal Conversion = Enable
DEFAULT
CODE 5
The following options apply to the Code 5 symbology.
Code 5 Enable/Disable
Enables/Disables ability of imager to decode Code 5 labels.
DEFAULT
Code 5 = Disable
Code 5 = Enable