Codabar quiet zones, Default – Wasp Barcode WLS9600 Product Reference Guide User Manual
Page 180

Codabar
ENTER/EXIT PROGRAMMING MODE
170
WLS9600
Codabar Quiet Zones
Specifies the number of quiet zones for Codabar labels. Quiet zones are blank areas at the ends
of a barcode and are typically 10 times the width of the narrowest bar or space in the label.
Codabar Quiet Zones = Quiet Zone on one side
Codabar Quiet Zones = Quiet Zones on two sides
Codabar Quiet Zones = Auto
DEFAULT
Codabar Quiet Zones = Virtual Quiet Zones on two sides
Codabar Quiet Zones = Small Quiet Zones on two sides