Wasp Barcode WLS9600 Product Reference Guide - Manual (Page 211)

ENTER/EXIT PROGRAMMING MODE Code 93 Set Length 1
Product Reference Guide 201
Code 93 Set Length 1
Specifies one of the barcode lengths for Code 93 Length Control . Length 1 is the minimum label
length if in Variable Length Mode, or the first fixed length if in Fixed Length Mode. Length
includes the barcode’s data characters only. The length can be set from 01 to 50 characters.
Table 22 provides some examples for setting Length 1. See page 242 for detailed instructions on
setting this feature.
Table 22. Code 93 Length 1 Setting Examples
STEP ACTION EXAMPLES
1 Desired Setting 01 Characters 07 Characters 15 Characters 50 Characters
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT CODE 93 LENGTH 1 SETTING
4
Scan Two Characters From
Appendix D, Keypad
‘0’ and ‘1’ ‘0’ and ‘7’ ‘1’ and ‘5’ ‘5’ AND ‘0’
5 Scan ENTER/EXIT PROGRAMMING MODE
Select Code 93 Set Length 1 Setting
Make a mistake? Scan the CANCEL barcode to abort and not save the
entry string. You can then start again at the beginning.
CANCEL
DEFAULT 01 = Length 1 is 1 Character