Codablock f set length 1, Default – Wasp Barcode WLS9600 Product Reference Guide User Manual
Page 147

ENTER/EXIT PROGRAMMING MODE
Codablock F Set Length 1
Product Reference Guide
137
Codablock F Set Length 1
Specifies one of the barcode lengths for
. Length 1 is the minimum
label length if in
Mode, or the first fixed length if in
Mode. Length
includes the barcode’s data characters only. Characters can be set from 03 to 255 characters.
provides some examples for setting Length 1. See
for detailed instructions on
setting this feature.
Table 6. CODABLOCK F Length 1 Setting Examples
STEP
ACTION
EXAMPLES
1
Desired Setting
03 Characters
07 Characters
15 Characters
50 Characters
2
Scan ENTER/EXIT PROGRAMMING MODE
3
Scan SELECT CODABLOCK F LENGTH 1 SETTING
4
Scan Three Characters From
‘0’, ‘0’ and ‘3’
‘0’, ‘0’ and ‘7’
‘0’,‘1’ and ‘5’
‘0’,‘5’ AND ‘0’
5
Scan ENTER/EXIT PROGRAMMING MODE
Select Codablock F Length 1 Setting
Make a mistake? Scan the CANCEL barcode to abort and not save the
entry string. You can then start again at the beginning.
CANCEL
DEFAULT
03 = Length 1 is 3 Characters