I 2 of 5 set length 1, Default – Wasp Barcode WLS9600 Product Reference Guide User Manual
Page 154
Interleaved 2 of 5 (I 2 of 5)
ENTER/EXIT PROGRAMMING MODE
144
WLS9600
I 2 of 5 Set Length 1
This feature specifies one of the barcode lengths for
minimum label length if in
Variable Length
Mode, or the first fixed length if in
Mode. The length includes the barcode’s check and data characters. The length can be set from
2 to 50 characters in increments of two.
provides some examples for setting Length 1. See
for detailed instructions on
setting this feature.
Table 8. I 2 of 5 Length 1 Setting Examples
STEP
ACTION
EXAMPLES
1
Desired Setting
2 Characters
6 Characters
14 Characters
50 Characters
2
Pad with leading zeroes to
yield two digits
02
06
14
50
3
Scan ENTER/EXIT PROGRAMMING MODE
4
Scan SELECT I 2 of 5 LENGTH 1 SETTING
5
Scan Two Characters From
‘0’ and ‘2’
‘0’ and ‘6’
‘1’ and ‘4’
‘5’ AND ‘0’
6
Scan ENTER/EXIT PROGRAMMING MODE
Select I 2 of 5 Length 1 Setting
Make a mistake? Scan the CANCEL barcode to abort and not
save the entry string. You can then start again at the begin-
ning.
CANCEL
DEFAULT
06 = Length 1 is 6 Characters