Codablock f aim check, Codablock f length control, Codablock f aim check codablock f length control – Wasp Barcode WLS9600 Product Reference Guide User Manual
Page 146: Default

Codablock F
ENTER/EXIT PROGRAMMING MODE
136
WLS9600
Codablock F AIM Check
Specifies if Check Digit calculation algorithm is AIM compliant or not.
Codablock F AIM Check = Disable
Codablock F AIM Check = Enable Check C
DEFAULT
Codablock F Length Control
This feature specifies either variable length decoding or fixed length decoding for the Codablock
F symbology.
Variable Length.
For variable length decoding, a minimum and maximum length may be set.
Fixed Length.
For fixed length decoding, two different lengths may be set.
DEFAULT
Codablock F Length Control = Variable Length
Codablock F = Fixed Length