Code 128 set length 2, Default – Wasp Barcode WLS9600 Product Reference Guide User Manual
Page 139

ENTER/EXIT PROGRAMMING MODE
Code 128 Set Length 2
Product Reference Guide
129
Code 128 Set Length 2
This feature specifies one of the barcode lengths for
. Length 2 is the
Mode, or the second fixed length if in
Mode. Length includes the barcode’s data characters only.
The length can be set from 1 to 80 characters. A setting of 0 specifies to ignore this length (only
one fixed length).
provides examples for setting Length 2. See
for detailed instructions on setting
this feature.
Table 5. Code 128 Length 2 Setting Examples
STEP
ACTION
EXAMPLES
1
Desired Setting
00 (Ignore This
Length)
07 Characters
15 Characters
80 Characters
2
Scan ENTER/EXIT PROGRAMMING MODE
3
Scan SELECT CODE 128 LENGTH 2 SETTING
4
Scan Two Characters From
‘0’ and ‘0’
‘0’ and ‘7’
‘0’ and ‘F’
‘5’ AND 0’
5
Scan ENTER/EXIT PROGRAMMING MODE
.
Select Code 128 Length 2 Setting
Make a mistake? Scan the CANCEL barcode to abort and not
save the entry string. You can then start again at the begin-
ning.
CANCEL
DEFAULT
80 = Length 2 is 80 Characters