Code 39 set length 1, Default – Wasp Barcode WLS9600 Product Reference Guide User Manual
Page 123

ENTER/EXIT PROGRAMMING MODE
Code 39 Set Length 1
Product Reference Guide
113
Code 39 Set Length 1
This feature specifies one of the barcode lengths for
. Length 1 is the
Mode, or the first fixed length if in
Mode. Length includes the barcode’s data characters only. The length can be set from 0 to 50
characters.
Table
2
provides examples for setting Length 1. See
for detailed instructions on setting
this feature.
Table 2. Code 39 Length 1 Setting Examples
STEP
ACTION
EXAMPLES
1
Desired Setting
00 Characters
07 Characters
15 Characters
50 Characters
2
Scan ENTER/EXIT PROGRAMMING MODE
3
Scan SELECT CODE 39 LENGTH 1 SETTING
4
Scan Two Characters From
‘0’ and ‘0’
‘0’ and ‘7’
‘1’ and ‘5’
‘5’ AND ‘0’
5
Scan ENTER/EXIT PROGRAMMING MODE
Select Code 39 Set Length 1 Setting
Make a mistake? Scan the CANCEL barcode to abort and not
save the entry string. You can then start again at the begin-
ning.
CANCEL
DEFAULT
02 = Length 1 is 2 Characters