Code 11 set length 2, Default – Wasp Barcode WLS9600 Product Reference Guide User Manual
Page 196

Code 11
ENTER/EXIT PROGRAMMING MODE
186
WLS9600
Code 11 Set Length 2
This feature specifies one of the barcode lengths for
. Length 2 is the
maximum label length if in
Mode, or the second fixed length if in
Mode. Length includes the barcode’s check and data characters.
The length can be set from 2 to 50 characters. A setting of 0 specifies to ignore this length (only
one fixed length).
provides examples for setting Length 2. See
setting this feature.
Table 19. Code 11 Length 2 Setting Examples
STEP
ACTION
EXAMPLES
1
Desired Setting (pad with
leading zeroes)
00 (Ignore This
Length)
07 Characters
15 Characters
50 Characters
2
Scan ENTER/EXIT PROGRAMMING MODE
3
Scan SELECT CODE 11 LENGTH 2 SETTING
4
Scan Two Characters From
‘0’ and ‘0’
‘0’ and ‘7’
‘0’ and ‘F’
‘3’ AND 2’
5
Scan ENTER/EXIT PROGRAMMING MODE
Select Code 11 Length 2 Setting
Make a mistake? Scan the CANCEL barcode to abort and not
save the entry string. You can then start again at the begin-
ning.
CANCEL
DEFAULT
50 = Length 2 is 50 Characters