Code 39 set length 2, Default – Wasp Barcode WLS9600 Product Reference Guide User Manual
Page 124
Code 39
ENTER/EXIT PROGRAMMING MODE
114
WLS9600
Code 39 Set Length 2
This feature specifies one of the barcode lengths for
. Length 2 is the
maximum label length if in
Mode, or the second fixed length if in
Mode. Length includes the barcode’s check, data, and full-ASCII shift characters. The length
does not include start/stop characters.
provides examples for setting Length 2. See
for detailed instructions on setting
this feature.
Table 3. Code 39 Length 2 Setting Examples
STEP
ACTION
EXAMPLES
1
Desired Setting
00 (Ignore This
Length)
07 Characters
15 Characters
50 Characters
2
Scan ENTER/EXIT PROGRAMMING MODE
3
Scan SELECT CODE 39 LENGTH 2 SETTING
4
Scan Two Characters From
‘0’ and ‘0’
‘0’ and ‘7’
‘1’ and ‘5’
‘5’ AND ‘0’
5
Scan ENTER/EXIT PROGRAMMING MODE
Select Code 39Length 2 Setting
Make a mistake? Scan the CANCEL barcode to abort and not
save the entry string. You can then start again at the begin-
ning.
CANCEL
DEFAULT
50 = Length 2 is 50 Characters