Always on scan mode timeout, Lways, Imeout – Wasp Barcode WLS9600 Product Reference Guide User Manual
Page 240: Default

ENTER/EXIT PROGRAMMING MODE
230
WLS9600
Always On Scan Mode Timeout
When the WLS9600 is in Always On scanning mode, timeout periods can be configured. If the
programmed Always On Timeout elapses, the reader will shut down and a trigger pull is
required to resume operation.
Always On Timeout: 1 Hour
Always On Timeout: 2 Hours
Always On Timeout: 3 Hours
Always On Timeout: 4 Hours
DEFAULT
Always On Timeout: 5 Hours