TCI HGA Manual - Manual (Page 75)

75
■ Section 7
Operation
HMI Screen Elements
This section focuses on the operation of the HMI Display. The HMI Display contains several screens that
allow the user to monitor the status of the line/load and the HarmonicGuard Active filter. Additionally the
HMI display can be used for local run/stop control and basic setup of the HarmonicGuard Active filter.
Table 7.1 – General HMI Screen Elements
HMI Graphic Element Example Description
Buttons
Buttons will appear raised or
depressed, depending on set point
and command conditions.
Indicators
Indicator status fields will appear
flat and are read only.
Numerical Displays
Display fields will appear flat.
Numerical displays are read only.
Numerical Entry Fields
Numerical Entry fields appear
indented. Selecting them will open
a keypad for numerical entry.
Navigation Bar
The Navigation Bar allows for easy
navigation between the five major
HMI screens. The Navigation Bar
appears on all HMI screens.
Title Bar
The Title Bar contains the current
system time, screen selection, and
a stop button to turn off the system.
The Navigation Bar appears on all
HMI screens.