TCI HGA Manual - Manual (Page 24)

24
Communications Part Numbering
Table 3.1 below shows the HGA part numbering with the communications part numbers. The base
communications unit is CM100A00 which has both the HMI and Modbus.
Table 3.1 – Communcation Part Numbering
Options Descriptions
CM Communications
39, 45, 50, 78, 90, 100,
200, 300
Amp rating
A, C
A Voltage rating of 480V
C Voltage rating of 600V
00, 01
00 Modbus RTU over RS485
01 Ethernet/IP
Standard Product Ratings and Dimension Tables
The following tables list the ratings and dimensions of the standard HarmonicGuard Active filter
models. See drawing at the end of this manual.
• Table 3.2 – Open Chassis
• Table 3.3 – UL Type 1 Enclosed
• Table 3.4 – UL Type 3R Enclosed
• Table 3.5 – 600V Open and Type 3R
Table 3.2 – Open Chassis
Amps
Heat Loss
(watts)
Weight lbs.
(kg)
Dimensions Inch (cm)
H x W x D
39 2676 167 (75.8) 56 (142.2) 17 (43.2) 14.18 (36.6)
45 & 50 2676 167 (75.8) 56 (142.2) 17 (43.2) 14.18 (36.6)
78 3500 167 (75.8) 56 (142.2) 17 (43.2) 14.18 (36.6)
90 & 100 3500 167 (75.8) 56 (142.2) 17 (43.2) 14.18 (36.6)
200 7000 340 (154.22) 57.97 (147.25) 32 (81.28) 14.18 (36.6)
Table 3.3 – UL Type 1 Enclosed
Amps
Heat Loss
(watts)
Weight lbs.
(kg)
Dimensions Inch (cm)
H x W x D
39 2676 254 (115.2) 60.15 (152.8) 17.57 (44.5) *16.4 (41.7)
50 2676 254 (115.2) 60.15 (152.8) 17.57 (44.5) *16.4 (41.7)
78 3500 254 (115.2) 60.15 (152.8) 17.57 (44.5) *16.4 (41.7)
100 3500 254 (115.2) 60.15 (152.8) 17.57 (44.5) *16.4 (41.7)
200 7000 480 (217.72) 64.17 (163) 32.62 (82.86) *17.2 (43.7)
300 10500 1042.4 (472.9) 84.20 (213.9) 63.3 (160.8) *23.9 (60.7)
*Add Two Inches for Disconnect/Circuit Breaker Handle,