TCI HGA Manual - Manual (Page 103)

103
Table 9.2 – EtherNet/IP Connector Pinout
Pin Number Description
1 TD+
2 TD-
3 RD+
6 RD-
4, 5, 7, 8 Termination
Configuration
To configure the IP address of the EtherNet/IP communications gateway connect the gateway to the Ethernet
network then open a web browser window and type in the default IP address of the gateway (see Table 9.2)
and press enter. The Communications Gateway configuration page should load (see Figure 9.3).
Figure 9.3 – EtherNet/IP Gateway Configuration Page
Table 9.3 – Gateway Default Settings
Setting Default Value
IP Address 192.168.0.1
Gateway 255.255.255.0
Subnet 255.255.255.0
DHCP Off