8options and attachments, 1options and attachments, 1cutterbar plastic wear strips – MacDon FD75 OM User Manual
Page 429: 2divider latch kit, Options and attachments, Cutterbar plastic wear strips, Divider latch kit, 1 options and attachments, 1 cutterbar plastic wear strips, 2 divider latch kit
8
Options and Attachments
8.1
Options and Attachments
The following options and attachments are available for use with your header. Most come with installation
instructions. See your MacDon Dealer for availability and ordering information.
8.1.1
Cutterbar Plastic Wear Strips
Available as an attachment, they are recommended for
cutting on the ground where soil adheres to steel.
Bundles by header size:
• 30 ft. – MD #B4839
• 35 ft. – MD #B4840
• 40 ft. – MD #B4841
• 45 ft. – MD #B5114
Figure 8.1
8.1.2
Divider Latch Kit
The latches attach to the endsheets.
They allow for
quick removal of endsheet divider cones to accommodate
storage and if required, to reduce the transport width of the
header. Installation instructions are included with the kit.
MD #B5607
Figure 8.2: Divider Latch
169894
415
Revision A