5checking hydraulic hoses and lines, 6lubrication and servicing, Checking hydraulic hoses and lines – MacDon FD75 OM User Manual
Page 276: Lubrication and servicing, 5 checking hydraulic hoses and lines, Warning, 6 lubrication and servicing caution

6.3.5
Checking Hydraulic Hoses and Lines
Check hydraulic hoses and lines daily for signs of leaks.
WARNING
• Avoid high-pressure fluids.
Escaping fluid can
penetrate the skin causing serious injury. Relieve
pressure before disconnecting hydraulic lines.
Tighten all connections before applying pressure.
Keep hands and body away from pin holes and
nozzles which eject fluids under high pressure.
• If ANY fluid is injected into the skin, it must be
surgically removed within a few hours by a doctor
familiar with this type of injury or gangrene may
result.
• Use a piece of cardboard or paper to search
for leaks.
Figure 6.18
IMPORTANT:
Keep hydraulic coupler tips and connectors
clean. Dust, dirt, water, and foreign material are
the major causes of hydraulic system damage.
Do NOT attempt to service hydraulic system in
the field. Precision fits require WHITE ROOM
CARE during overhaul.
Figure 6.19
6.3.6
Lubrication and Servicing
CAUTION
To avoid personal injury, before servicing header or opening drive covers, follow procedures in
Preparation for Servicing, page 241
.
Refer to
6.2.2 Recommended Fluids and Lubricants, page 244
for recommended lubricants.
Log hours of operation and use the Maintenance Record provided to keep a record of scheduled maintenance. Refer
to
6.3.1 Maintenance Schedule/Record, page 258
.
169894
262
Revision A