MacDon FD75 OM - Manual (Page 358)

MAINTENANCE AND SERVICING
4. Loosen draper by turning adjuster bolt (A)
counterclockwise.
Figure 6.180: Tensioner
5. Remove fasteners (A) and tube connectors (B) at the
draper joint to uncouple the draper.
6. Pull the draper off the drive roller.
Figure 6.181: Draper Connector
7. Line up the setscrews with the hole (A) in the guard.
Remove the two setscrews that hold the motor onto
the drive roller.
NOTE:
The setscrews are a 1/4 turn apart.
8. Remove the four bolts (B) that hold motor to the drive
roller arm.
NOTE:
Plastic shield (C) may require removal to gain
access to the top bolt.
Figure 6.182: Drive Roller
169894 344 Revision A