MacDon FD75 OM - Manual (Page 381)

MAINTENANCE AND SERVICING
4. Loosen the six bolts (B) and slide the hydraulic motor
downwards to loosen driven chain (A).
5. Remove the drive chain (A) from drive sprocket.
Figure 6.239: Drive Chain
6. Remove sprocket (A).
IMPORTANT:
Do not use pry bar and/or hammer to remove
sprocket. This will damage the motor. Use a puller
if sprocket does not come off by hand.
7. Disconnect hydraulic lines (B) at motor. Cap or plug
open ports and lines.
Figure 6.240: Reel Drive Sprocket
8. Remove the nuts and bolts (A), and the hydraulic motor
from the motor mount (B).
Figure 6.241: Reel Drive Motor
169894 367 Revision A