Lenze 931E/K Small Drives Control - Manual (Page 25)

Commissioning
Speed control
Selecting a motor from the motor database (only 931E)
5
l
25 SW−HB 13.0002−EN 4.1
5.2.3 Selecting a motor from the motor database (only 931E)
The Small Drives Control parameterisation program contains a motor database with the
most important data for different motor types.
)
Note!
The motor database contains the data of the Lenze synchronous servo motors.
Apart from the motor data (pole pair number, stator inductance,
…), default
settings for the feedback system and current and speed controller have been
implemented. Using the default settings will make commissioning fast and
easy.
The function can be accessed via the menu Parameters
W Device parameters W Motor data
W Select new motor. A list will be displayed, from which you can select the motor used:
931e_372
If a Lenze motor is used, select the motor and confirm your selection with Accept values and
close dialog.
Otherwise, click Quit without changes.