Lenze 931E/K Small Drives Control - Manual (Page 155)

Appendix
Parameterisation of outside motors
Defining the input limits
10
l
155 SW−HB 13.0002−EN 4.1
10.1.14 Defining the input limits
Select Options
W Input limits to open the following menu:
931e_312
Enter the maximum speed and acceleration values expected for your application. The
program uses your entries for the input field limits.
)
Note!
ƒ The input limits can be changed later. They will, however, only have an
effect on the input fields of the parameter setting program!
ƒ The speed and acceleration values in the drive will not be physically limited.
Use the menu "Safety parameters" to limit the values in the drive. For more
information, please see the chapter "Selecting the safety parameters".
(
¶ 140)