JUMO 706030 LOGOPRINT 500 Printing Recorder Operating Manual - Manual (Page 8)

1 Introduction
8
1.2 Arrangement of the documentation
The documentation for this instrument consists of the following parts:
Operating
Manual
B 70.6030.0 This operating manual is always supplied with the instrument. It is addressed
to OEMs (original equipment manufacturers) and users with the appropriate
technical know-how.
In addition to installation and electrical connections, it also includes
information on commissioning, operation, and setting the parameters in the
instrument, on extra codes and accessories.
Interface
Description
B 70.6030.2 This manual is supplied with the instrument if the Extra Code “RS422” or
“RS485” was ordered. It provides information about communication with
higher-level (supervisory) systems.
Setup
Program
B 70.6030.3 This manual describes the installation of the setup program, and also deals
with special features in the operation of the setup program.
Online Help The online help is part of the setup program. It is a Windows
1
online help.
1.2.1 Structure of this operating manual
This operating manual is laid out so that the user is immediately able to get on
with operating and configuring the instrument. To this end, the chapters which
describe procedures which are usually only carried out once, such as
description of the instrument, type designations, assembly and electrical
connections, are placed at the end of the manual.
1. Microsoft and Windows are registered trademarks
of the Microsoft Corporation