JUMO 706030 LOGOPRINT 500 Printing Recorder Operating Manual - Manual (Page 46)

3 Operation and visualisation
46
3.5.9 Time
The print-out is performed cyclically, at a configurable spacing (Configuration
level 2
Î Print time).
Selectable spacings:
- approx. 2cm
- approx. 4cm
- approx. 6cm
- not time printing
The spacings do not depend on the paper feed which has been set up. The
spacings listed above are only approximates, since the print is made at round
values of time.
For every fourth print-out of the time, there will also be produced, alternating
after the time, the actual current chart speed, the programmed instrument
name, or the date.
The date is also normally printed out when the date changes at 00:00 hrs.
To provide a precise time reference on the chart paper, a time reference mark
(“_”) is placed before the text.