JUMO 706030 LOGOPRINT 500 Printing Recorder Operating Manual - Manual (Page 22)

2 Instrument description
22
Configuration
level 3 (C3-level) Configuration level 3 can be accessed from configuration level 2 with the aid
of the
h + R keys.
Configuration level 3 contains parameters which mostly belong to the extra
codes and the mathematics module:
- relay output
1
- mathematical module
- interface
2
- external text
1
- text logic links
1
- external stop
1
- external speed
1
- event counter
1
- external scaling
1
- external report
1
- key inhibit
1
- event traces
H
If a correct code number is entered when calling up the parameter
level, then the signal acquisition and recording will be interrupted
in this level. The parameters can be viewed and altered.
H
The relays of the external relay module ER8 remain in the present
state. They will only be switchable again when the printing record-
er has been returned to the operating level or the basic status.
1. The parameters can only be edited if the extra codes
“logic inputs” and “interface for ER8” have been implemented in the recorder.
2. The parameter can only be edited if the extra code “RS 422”
or “RS 485” has been implemented in the recorder.