beautypg.com

4 program start, Program start, 7 setup program – JUMO 709061 TYA 201 - Single-Phase Power Controller Operating Manual User Manual

Page 92

background image

7 Setup program

90

2012-12-01/00561071 [SCR Power Controller TYA201]

7.4 Program start

h Start the setup program via the Windows start menu

h Insert the supplied USB cable in the socket of the power controller and in

one of the PC's sockets

h Click Connect in the menu bar

Diagnosis

The diagnosis window appears at the bottom of the screen and shows the de-
vice info and the current measured data. The connection has thus been estab-
lished.

H

The power controller supplies no power while setup data is being transferred
"to the device". The device performs a restart after the transmission.