JUMO 709061 TYA 201 - Single-Phase Power Controller Operating Manual - Manual (Page 89)

2012-12-01/00561071 [SCR Power Controller TYA201] 87
7 Setup program
The setup program enables convenient configuration of all data for the device
on a PC, which can then be transferred to the device.
The configuration data is applied as soon as the device is switched on.
7.1 Hardware
- 500 MB hard disk space
- 512 MB RAM
7.2 Compatible operating systems
- Microsoft® Windows® 2000/XP/Vista
- Microsoft® Windows® 7 32-bit
- Microsoft® Windows® 7 64-bit
Users
In the event of non-observance of this information, correct and complete in-
stallation cannot be guaranteed!
Software
versions The software versions of the device and the setup program must be compati-
ble. If this is not the case, an error message will appear!
h After switching on the device, press the
key
The device software version is shown in the Device info menu.
h Click "Info" in the menu bar of the setup program
H
For configuration of the power controller it is sufficient to insert the
USB cable into the power controller and connect it to the PC.
H
If several users are managed on the computer, ensure that the user who
will work with the program later is logged in.
The user must have administrator rights for the installation of the soft-
ware. After installation, the rights can be restricted again.
On the device In the setup program