1 introduction, 1 preface, Introduction – JUMO 709061 TYA 201 - Single-Phase Power Controller Operating Manual User Manual
Page 7: Preface
2012-12-01/00561071 [SCR Power Controller TYA201]
5
1 Introduction
1.1 Preface
Please read this operating manual before starting up the device.
This operating manual is valid from device software version [256.01.05].
Keep the operating manual in a place that is accessible to all users at all times.
Your comments are appreciated and may assist us in improving this operating
manual.
Phone: +49 661 6003-727
Fax:
+49 661 6003-508
Service hotline
For technical questions
Phone support in Germany:
Phone: +49 661 6003-9135
Fax:
Austria:
Phone: +43 1 610610
Fax:
Switzerland:
Phone: +41 1 928 24 44
Fax:
A
The power controller produces the power that is needed at the analog input or
in manual mode. Safety systems independent of the power controller must be
installed that safely switch off the following heating process in the event of ex-
cess temperatures.
A
The power controller may only be operated using original JUMO semi-conduc-
tor fuses.
In the event of replacement, please check that the correct replacement part
has been used.
H
All necessary settings are described in this operating manual. Manipulations
not described in the operating manual or expressly forbidden will jeopardize
your warranty rights.
If you have any problems, please contact the nearest subsidiary or the head
office.
B