JUMO 709061 TYA 201 - Single-Phase Power Controller Operating Manual - Manual (Page 13)

2012-12-01/00561071 [SCR Power Controller TYA201] 11
1 Introduction
1.5 Standards, approvals, and conformity
Test basis for the device properties is the Low Voltage Directive DIN EN 50178.
Test basis for the EMC Directive is DIN EN 61326-1.
Standard
Electrical connection DIN VDE 0100
Protection type IP20 panel-mount-
ing devices DIN EN 60529
Climatic ambient conditions Class 3K3
Air temperature and rel. humidity DIN EN 60721-3-3
Storage temperature Class 1K5 DIN EN 60721-3-1
Operating conditions
Pollution degree
Overvoltage category DIN EN 50178
2
III
Test voltages DIN EN 50178
Residual current circuit breaker DIN EN 50178
Electromagnetic compatibility
Emitted interference
Interference resistance DIN EN 61326-1
Class A- For industrial applications only
Industrial requirements
Mechanical tests:
Vibration test 3M2
Toppling test Class 2M1
DIN EN 60068-2-6, DIN EN 60721-3-3
DIN EN 60068-2-31, DIN EN 60721-3-2
Labels, identification marking DIN EN 50178, DIN EN 61010-1
Approvals Standard
submitted UL 508 (Category NRNT)
C22.2 NO. 14-10 Industrial Control Equipment
(Category NRNT7)
Can be used for current circuits with a short-circuit current capacity of
≤
100 kA (the admissible supply voltage must correspond to the nominal voltage of
the SCR power controller).
For system protection, a fuse up to Class RK5 may be used.
CE conformity Low Voltage Directives 2006/95/EC
Marking Directives 93/68EEC
EMC Directives 2004/108/EC
Conformity Standard
RoHs 2002 / 95 EC