JUMO 709061 TYA 201 - Single-Phase Power Controller Operating Manual - Manual (Page 69)

2012-12-01/00561071 [SCR Power Controller TYA201] 67
5 Configuration
5.1.10 PROFIBUS-DP
Interface parameters for PROFIBUS-DB (see separate manual)
5.1.11 Changing codes
Here, it is possible to assign passwords (4-digit numeric codes) for manual
mode, operator level, and configuration level to protect them from unau-
thorized access.
Value/settings Description
Device address 1 to 125 If "0" is set as the device address, the bus fault error message
is not displayed.
Data format Motorola, Intel
k
/ bold = factory setting
Value/settings Description
Code, manual
mode 0000 to 9999 0000 means: no inhibit
9999 means: level is hidden
Code, operator lev-
el 0000 to 9999 0000 means: no inhibit
9999 means: level is hidden
Code, config. level 0000 to 9999 0000 means: no inhibit
k / bold = factory setting