INFICON Composer Elite Gas Concentration Monitor - Manual (Page 72)

5 - 6
PN
07
4-
56
6-
P1
B
Composer Elite Operating Manual
5.4.1.5 Assembly Object (04h)
This assembly object uses static assemblies and holds the Composer Elite I/O.
The assembly instance IDs used are in the vendor specific range. Specifics on the
CE Out(Command) and CE IN(Response) are detailed later in the
section 5.5.1,
Command, on page 5-22 and section 5.5.2, Response, on page 5-22 .
NOTE: This is the object used to interact with Composer Elite Command &
Response messaging. This object can alternatively be used to publish data
as selected by the I/O Data Format attribute in the I/O Data Format Object.
The supported services are:
 Class - None
 Instance - Get/Set Attribute Single
Table 5-4 Instance 64h Attribute (Producing Instance)
# Name Access Type Comments
3 CE Message Get Array of
byte
Data Corresponds to Composer Elite Input
(CE IN)
Table 5-5 Instance 96h Attribute (Consuming Instance)
# Name Access Type Comments
3 CE Message Set Array of
byte
Data Corresponds to Composer Elite
output (CE OUT)