INFICON Composer Elite Gas Concentration Monitor - Manual (Page 110)

6 - 4
PN
07
4-
56
6-
P1
B
Composer Elite Operating Manual
6.3.1 User Login
Composer Elite Multi Sensor Software is locked until a user name and password
are entered in the User window (see
Figure 6-2 .) Type the word Tech (case
sensitive) into the Type and Password boxes, then click Login to unlock the
software.
Figure 6-2 User login
6.3.2 Comm Settings
Before Composer Elite Multi-Sensor Software can read data from the
Composer Elite System, RS-232 or DeviceNet connection must be established.
This is done on the Comm Settings window found at the top right of the
Composer Elite Multi Sensor Display window.
For RS-232 communications:
1 Set the port to the communication port number used by the computer. This
communication could be direct RS-232 or via a USB to RS-232 adapter. If using
an adapter, make sure the adapter driver is loaded and the device works
properly using Hyper Terminal or similar communications application.
2 The Baud Rate is fixed at 115,200 baud.
3 Set Comm Device to RS-232.
4 Press Comm Disabled to enable communications. Once communication is
established Comm Enabled will be displayed and all Comm setting options will
be displayed in grey . See Figure 6-3 .
NOTE: Comm status is shown by button color, which changes from
Comm Enabled (green) to Comm Disabled (red) depending
on comm status.