beautypg.com

Beeper, Section 2.7, Disabling the beeper – INFICON STM-100/MF Thin Film Deposition Monitor User Manual

Page 32

background image

shutter open and close buttons control the simulated deposition. The test
mode may be turned off by holding the UP ARROW key depressed and then
activating the SHUTTER OPEN key. Turning the unit off and back on also
clears the test mode.

BEEPER

The beeper will give a short audible tone when any key is depressed or

the unit power switch is turned on. The keyboard beeper may be disabled if
desired by holding the DOWN ARROW key and activating the SHUTTER
CLOSE key while not in the PROGRAM mode. The same procedure and
activating the SHUTTER OPEN key will turn the beeper on.

The beeper will always be enabled after power is applied to the unit.

SECTION 2.7

Disabling the Beeper

OPERATION AND PROGRAMMING

Page 2 - 12