ETC Unison ERn Wall-mount Control Enclosure - Manual (Page 6)

2 Unison ® ERn Wall Mount Enclosure Installation Manual
ERn Modules and Options
Model
Part
Number
Description Notes
P-ACP 7180A1001 Paradigm Architectural
Control Processor The Paradigm ACP provides powerful and flexible control for
architectural and theatrical applications with integrated
networking for both NetConnect and LinkConnect networks.
• Supports up to 1024 control channels using industry standard
protocols.
• User interface remains accessible with the enclosure door
closed.
• Supports up to 62 Unison control stations over the
LinkConnect network with the use of Paradigm Station Power
and Repeater Modules.
• Supports up to 12 Paradigm Touchscreen Stations using
LinkConnect or NetConnect protocols.
• Provides two ports of one DMX universe each (512 addresses
each), individually switchable between input and output.
P-SPM 7182A1001 Paradigm Station
Power Module The Paradigm Station Power Module (P-SPM) provides power for
Unison control stations over the LinkConnect network and
supports the station data bus length up to 1,640 feet (500m).
• Supports up to 32 Unison control stations over LinkConnect.
P-REP 7182A1003 Paradigm Station
Repeater Module The Paradigm Station Repeater (P-REP) module extends the
system station bus length by 1,640 feet (500m) and increases the
possible station count by an additional 30 stations. For use only in
an ERn4 enclosure.
• For use in an ERn4 enclosure only.
• Supports up to 30 additional Unison control stations over
LinkConnect.
P-DREP 7182A1004 Paradigm Dual Station
Repeater Module The Paradigm Dual Station Repeater (P-DREP) module extends
the system station bus length by 3,280 feet (1,000m) through two
separate topology-free segments, each supporting 1,640 feet
(500m).
• The dual repeater supports up to 30 additional Unison control
stations.
• For use in an ERn4 enclosure only.
P-ACP
P-SPM
P-REP
P-DREP
ERn-NET
ERn-RPS
UBPO
URTO
ERn-BM