beautypg.com

Status indicators, N o t e – ETC Unison ERn Wall-mount Control Enclosure User Manual

Page 42

background image

38

Unison

®

ERn Wall Mount Enclosure Installation Manual

Status Indicators

When power is applied to the ERn enclosure, the Paradigm Ethernet Switch Module LEDs, located
on the front panel, indicate main power, data, and PoE power status.

• The power LED is blue and will illuminate when the Ethernet Switch is powered.
• The LINK/ACT and PoE power LEDs are typical of an Ethernet Switch.

The Link/Act indicator is green and is on if there is a device connected to that port. A

blinking LED indicates data activity on the port.

The PoE indicator is yellow and will be on if the Ethernet Switch is supplying power to

the device connected to that port. A blinking PoE LED indicates a powering error on

that port.

N o t e :

Port one does not have a port power indicator as it does not supply power. Port

one is always connected to the Paradigm Architectural Control Processor which

is powered by the ERn enclosure power supply.

PoE

Power

LINK/ACT

1

2

3

4

5