ETC Source Four LED v1.6.0 User Manual - Manual (Page 79)

3
Operation 73
Error Messages
When a system error is detected, a message displays on the home screen. The message
changes to reflect the specific error type. When multiple errors are detected, each error
message cycles, in increasing numerical order on the display for 1 second each. The
following table lists the error messages.
Error Message Description
LED Ambient Overtemp
The LED head ambient temp is too hot and has been shut down, let
fixture cool down
LED Ambient High The LED head ambient is getting hot. Let the fixture cool.
LED Ambient Low The LED head ambient is too cold. Improper operating conditions.
Color System Fail
Fixture does not have its color information loaded. Most likely
represents a hardware failure.
LED Over Temp A specific LED is over-temp and the fixture has been shut down.
Internal Temp High Fixture internal temp is too hot.
Power Budget Active The fixture is reducing the LED output due to hot temperatures.
Internal Overtemp
The internal temperature is too hot, the fixture has been shut down.
Let the fixture cool.
Configuration Error
The stored configuration has been compromised. The fixture will
return to a default configuration.